sputtering coating, evaporation materials, titanium oxide TiO 99.9%, titanium oxide granules, 1-3, 3-5mm vacuum coating

Evaporation Materials TiO Granule, Optical Coating Use TiO 99.9%

• MF : TiO
• MW: 63.87
• CAS: 12137-20-1

Titanium dioxide is a black yellow powder (golden yellow powder). It is insoluble in water, nitric acid, sulfuric acid, and dilute hydrochloric acid. It is partially oxidized to trivalent titanium ions and produces hydrogen

The chemical properties of titanium dioxide are not very stable. It is prepared by heating titanium dioxide in carbon furnace or reducing with zinc, magnesium, hydrogen and other reducing agents

It is used to make titanate semiconductor. It contains 52% - 54% oxygen (atom).

Body centered cubic structure. The density was 4.888 g / cm3. The melting point is 1750 ℃. It is soluble in 40% (mass) hydrofluoric acid. It is easy to be eroded by hot concentrated sulfuric acid, concentrated hydrochloric acid and concentrated nitric acid. It can also be concentrated alkali erosion. It is a strong reducing agent. When heated by air, it transforms into titanium trioxide at 150-200 ℃. Titanium oxide can be obtained by heating the mixture of titanium and titanium dioxide at 1600 ℃ in vacuum, hydrogen reducing titanium dioxide at 2000 ℃ or magnesium reducing titanium dioxide at 1000 ℃. Titanium oxide can be used as electronic material because of its oxygen or titanium vacancy properties.

Relative molecular weight: 63.88, melting point (℃): 1750, boiling point: > 3000, density (g / cc, 300K): 4.93 g / cm3, solubility (water): insoluble in water, soluble in hot concentrated sulfuric acid, hydrochloric acid and nitric acid

Uses: titanium oxide can be used as catalyst for ethylene polymerization, titanate semiconductor, sunscreen film, black cosmetics, etc

Product Description: sputtering coating, evaporation materials, titanium oxide TiO, titanium oxide particles, 1-3, 3-5mm vacuum coating materials, optical coating materials

The purity of the target is 99.9%,

Titanium oxide TiO evaporation coating material, purity: 99.9%

The product specifications available are as follows:

Powder: - 625mesh, - 325mesh, - 200Mesh, - 160mesh, - 100Mesh e.t.c particle size

Sputtering target: diameter: 355.6mm (14 ") max. single piece size: length: < 254MM, width: < 127mm, thickness: > 1mm, if large size than this, we can do it as tiles joint by 45 degree or 90 degree

Evaporation materials: Pieces: 1-4mm, 1-6mm, 3-6mm, 3-12mm e.t.c, tablets: 8-9mm dia. X 4-5mm thick, 10mm dia. X 10mm thick e.t.c